BP3505CTFK BluePrint Engines 350 c.i SB Dressed Longblock w/ EFI and Pulley Kit BluePrint Engines 350 c.i. Small Block GM style drop in ready Engine - dressed longblock w/ EFI. incl. 30 month / 50,000 warranty & Dyno Part #: BP350CTFK.
*Stock may be limited please call for availability before ordering*
*Prices include shipping to a business address with a forklift or loading dock*
*Residential addresses or lift gate deliveries please call for a quote*
Description:
- Horsepower & Torque: 390 Horsepower / 410 FT. LBS. Torque
- Compression Ratio: 9.2:1
- Aluminum Heads
- Hydraulic Roller Cam
- Cast Crankshaft
- Hypereutectic Pistons
Block:
- BluePrint Engines High Strength Cast Iron Block
- Manufactured and Machined in the USA!
- 4-Bolt Main
- 4.000" Bore
- 1-Piece Rear Main Seal
- Mech Fuel Pump Provision: Yes
- Passenger Side Dipstick
- Drilled and Tapped for Clutch Linkage
Rotating Assembly:
- Cast Crankshaft
- 3.480" Stroke
- Forged 5.700" Connecting Rods
- Hypereutectic Pistons
- Internally Balanced Front - Externally Balanced Rear
Cylinder Heads:
- BluePrint Aluminum Cylinder Heads - H8002K
- 64cc Chamber
- 2.02" Intake / 1.60" Exhaust Valves
- 195cc Intake / 75cc Exhaust Runners
Cam Specs:
- Cam Type: Roller
- .495 Intake / .502 Exhaust Lift
- 220 Intake / 224 Exhaust Duration
- @ .050-114 Degree Lobe Separation
Ignition Timing:
- 32 Degrees Total at 3500 RPM
Also Includes:
- Valve Covers
- Rear Sump Oil Pan
- Harmonic Balancer
- Spark Plugs and Wires
- Timing Cover
- Aluminum Intake
- Water Neck
- Thermostat and Thermostat Housing
- HEI Distributor
- Holley Sniper II EFI
- Front Accessory Drive with Water Pump, A/C Compressor, Alternator, and Power Steering Pump
Recommended Break in Oil: BPP710 (Click Here)
Recommended Service Oil: BPP10W30 (Click Here)
Recommended Oil Filter: BPP51061 (Click Here)
Notes:
- The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment. Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles.
- Front Accessory Drive Does not fit Corvette
- The performance aluminum cylinder heads on this engine feature a .500 raised port vs OEM.