BP350CTCK BluePrint Engines 350 c.i SB Dressed Longblock w/ Carb and Pulley Kit BluePrint Engines 350 c.i. Small Block GM style drop in ready Engine - dressed longblock w/ carb. incl. 30 month / 50,000 warranty & Dyno Part #: BP350CTCK.
*Stock may be limited please call for availability before ordering*
*Prices include shipping to a business address with a forklift or loading dock*
*Residential addresses or lift gate deliveries please call for a quote*
Description:
- Horsepower & Torque: 341 Horsepower / 371 FT. LBS. Torque
- Compression Ratio: 9.2:1
- Aluminum Heads
- Hydraulic Roller Cam
- Cast Crankshaft
- Hypereutectic Pistons
Block:
- BluePrint Engines High Strength Cast Iron Block
- Manufactured and Machined in the USA!
- 4-Bolt Main
- 4.000" Bore
- 1-Piece Rear Main Seal
- Mech Fuel Pump Provision: Yes
- Passenger Side Dipstick
- Drilled and Tapped for Clutch Linkage
Rotating Assembly:
- Steel Crankshaft
- 3.480" Stroke
- Forged 5.700" Connecting Rods
- Hypereutectic Pistons
- Internally Balanced Front - Externally Balanced Rear
Cylinder Heads:
- BluePrint Aluminum Cylinder Heads - H8002K
- 64cc Chamber
- 2.02" Intake / 1.60" Exhaust Valves
- 195cc Intake / 75cc Exhaust Runners
Cam Specs:
- Hydraulic Roller
- .477 Intake / .471 Exhaust Lift
- 202 Intake / 212 Exhaust Duration
- @ .050-115 Degree Lobe Separation
Ignition Timing:
- 32 Degrees Total at 3500 RPM
Also Includes:
- Holley Street Warrior 600cfm Vacuum Secondary Carburetor w/ Electric Choke
- Black Front Accessory Drive with Water Pump, A/C Compressor, Alternator, and Power Steering Pump
- Valve Covers
- Rear Sump Oil Pan
- Timing Cover
- Aluminum Intake
- HEI Distributor
- Spark Plugs and Wires
- Mechanical Fuel Pump
- Water Neck
- Thermostat and Thermostat Housing
Recommended Break in Oil: BPP710 (Click Here)
Recommended Service Oil: BPP10W30 (Click Here)
Recommended Oil Filter: BPP51061 (Click Here)
Notes:
- The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment. Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles.
- Front Accessory Drive Does not fit Corvette.
- This engine is an excellent cruiser and daily driver engine. This engine makes up to 18 inches of vacuum, and is designed to work excellent with power brakes, stock torque converter, stock gearing, and run on 87 octane fuel
- The performance aluminum cylinder heads on this engine feature a .500 raised port vs OEM.