CPP 4L75E Transmission

Similar in design to the 4L65E/4L70-E, this 4L75-E electronically controlled four speed overdrive transmission is suitable for "LS" series V8 engines producing up to 650 Ft. Lbs of torque.

This transmission does not includes a torque converter.

Features:

Based on the 4L65-E/4L70-E
- Tested up to 650 ib-ft. of torque
- Features five-pinion gearsets, heat-treated stator shaft splines,    induction-hardened turbine shaft, 8-friction-plate 3–4 clutch and specific         valve-body calibration
- Unique, high-strength input housing
- Higher-capacity servo than 4L65E and 4L70E
- Performance 2–4 band
- Gear ratios: 1st: 3.06, 2nd: 1.62, 3rd: 1.00, 4th: 0.70

NOTE: Use with electronic controller P/N 19332775 for carbureted and Ram Jet applications. Use with electronic controller P/N 19302405 with Chevrolet Performance LS fuel-injected applications.

 NOTE: To use this transmission with a Gen V LT engine this will require 19125817 bell housing kit

NOTE: Chevrolet Performance torque converters consist of the converter and associated bolts. The part number on the box represents a kit, NOT the actual part number of the converter. Supermatic Torque Converter Kit 19299803 has a converter part number of 19299811.

NOTE: Use with electronic controller PN 19332775 for carbureted and Ram Jet applications.
Use with electronic controller PN 19302405 with LS and LT Fuel-Injected applications.


Technical Notes

• 11.062" Convertor Bolt Pattern
• Use a 14" 168-Tooth LS Style Flexplate with a 11.062" (281mm) Convertor Bolt Pattern, GM Part Number 12654640
• Will NOT Work with a 153-Tooth Flexplate!

Installation Instructions