Horsepower & Torque: 800 Horsepower / 780 ft. lbs. Torque

Cylinder Heads: BluePrint Engines LS3 Aluminum Cylinder Heads

Compression Ratio: 11:1

Camshaft: Hydraulic Roller Cam - .624 Intake / .624 Exhaust Lift and 239 Intake / 255 Exhaust Duration @ .050 - 114° LSA - Three Bolt Cam

Pistons: Forged

Crankshaft: Forged Crank - 4.125" Stroke and 6.125" Rods

Description:

• Horsepower & Torque: 800 Horsepower / 780 ft. lbs. Torque
• Compression Ratio: 11:1
• Aluminum Heads
• Hydraulic Roller Cam
• Forged Crank
• Forged Pistons

Block:

• BluePrint Engines High Strength Cast Iron Block
• Increased Deck Thickness and Strength Webbing
• Extended Cylinder Skirt
• Priority Main Oiling
• 6-Bolt Main
• 1-Piece Rear Main Seal
• Improved Water Jacket Design
• Utilizes OEM LS3 Front and Rear Covers

Rotating Assembly:

• New Forged Crankshaft
• 4.125" Stroke
• Forged 6.125" Connecting Rods
• Forged Pistons
• Internally Balanced

Cylinder Heads:

• BluePrint Aluminum Cylinder Heads - PS8015
• 70cc Chamber
• 2.165" Intake / 1.600" Exhaust Valves
• 259cc Intake / 102cc Exhaust Runners

Cam Specs:

• Hydraulic Roller
• .624 Intake / .624 Exhaust Lift
• 239 Intake / 255 Exhaust Duration
• @.050-114 Degree Lobe Separation

Ignition Timing:

• ECM Supplied with Calibration

Also Includes:

• Holley Terminator X Max - Gen IV Complete ECU/Harness EFI System
• Magnuson TVS2650 Super Charger
• Coil Packs
• Valve Covers
• Oil Pan
• All Sensors Required for Engine to Run
• Drive by Wire Throttle Body
• Throttle Pedal
• Timing Cover
• Spark Plugs & Wires
• Harmonic Balancer
• Front Accessory Drive with Power Steering Pump, Water Pump, Alternator, and Air Compressor

Notes:

• Not for use in pollution-controlled vehicles.
• BluePrint Engines Recommends Air Intake Kit BPPLS01013 to ensure correct calculations and Dyno calibration are maintained with the provided ECU / tuning.
• Terminator X MAX is capable of transmission control but requires additional Transmission harness Such as BPP558405 if pairing to 96-08 4L60E or 4l80E.