• Horsepower & Torque: 741 Horsepower / 703 FT. LBS. Torque
• Compression Ratio: 10.5:1
• Aluminum Heads
• Hydraulic Roller Cam
• Forged Crank
• Forged Pistons

Block:

• BluePrint Engines High Strength Cast Iron Block
• Manufactured and Machined in the USA!
• 4-Bolt Main
• 4.600" Bore
• 1-Piece Rear Main Seal
• Mech Fuel Pump Provision: Yes
• Standard Deck

Rotating Assembly:

• New BluePrint Forged Crankshaft
• 4.500" Stroke
• Forged H-beam 6.480" Connecting Rods
• Forged Pistons
• Internally Balanced

Cylinder Heads:

• BluePrint Aluminum Cylinder Heads - PS8012
• 119cc Chamber
• 2.30" Intake / 1.88" Exhaust Valves
• 358cc Intake / 125cc Exhaust Runners
• Cylinder Heads Feature a .300 in. Raised Exhaust Port vs an OEM Casting
• Must Verify Header / Exhaust Clearance

Cam Specs:

• .647 Intake / .647 Exhaust Lift
• 258 Intake / 266 Exhaust Duration
• @ .050-112 Degree Lobe Separation

Ignition Timing:

• 34° Total Timing

Also Includes:

• Valve Covers
• Oil Pan
• Timing Cover
• Harmonic Balancer
• Intake Manifold
• 1250cfm Holley Carburetor
• Distributor
• Spark Plugs and Wires
• Front Accessory Drive with Alternator, A/C Compressor, Power Steering Pump, and Water Pump

Notes:

• Cylinder heads feature a .300 in. raised exhaust port vs an OEM casting
• Must verify header/exhaust clearance

• The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment.  Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles.