BP38318MPFIK BluePrint Engines 383 c.i SB Dressed Longblock w/ EFI and Pulley Kit BluePrint Engines 383 c.i. Small Block GM style drop in ready Engine - dressed longblock w/ carb. incl. 30 month / 50,000 warranty & Dyno Part #: BP38318MPFIK
*Stock may be limited please call for availability before ordering*
*Prices include shipping to a business address with a forklift or loading dock*
*Residential addresses or lift gate deliveries please call for a quote*Horsepower & Torque: 436 Horsepower / 443 FT. LBS. Torque
Cylinder Heads: BluePrint Engines Aluminum Cylinder Heads
Compression Ratio: 10:1
Camshaft: Hydraulic Roller Cam - .544 Intake / .555 Exhaust Lift and 230 Intake / 236 Exhaust Duration @ .050 - 110° LSA
Pistons: Hypereutectic
Crankshaft: Steel Crank - 3.750" Stroke and Forged 5.700" Rods
OVERVIEW:
The BluePrint 383 Small Block Chevy compatible performance crate engines are dyno tested at our factory with guaranteed power levels of 436 horsepower and 443 ft. lbs. of torque. The BluePrint designed, multi-port fuel injection system, complete with ECU and full Wiring Harness, has had extensive calibration and development work in creating this specifically tuned and optimized engine that goes well beyond the performance of self-learn EFI systems on the market today. This BluePrint ECU is designed for hassle-free start up and operation. The ECU controls ignition timing and fuel and installs with 3 simple wired connections (Main Battery, Switched 12V Ignition Wire and Fuel Pump).
DESCRIPTION:
- Horsepower & Torque: 436 Horsepower / 443 FT. LBS. Torque
- Cylinder Heads: BluePrint Performance Aluminum Heads - H8002K
- Compression Ratio: 10.0:1
BLOCK:
- BluePrint Engines High Strength Cast Iron Block
- Manufactured and Machined in the USA!
- 4-Bolt Main
- 4.000" Bore
- 1-Piece Rear Main Seal
- Drilled and Tapped for Clutch Linkage
ROTATING ASSEMBLY:
- New BluePrint Cast Steel Crankshaft
- 3.750" Stroke
- 5.700" Connecting Rods
- Hypereutectic Pistons
- Externally Balanced Front and Rear
CYLINDER HEADS:
- BluePrint Performance Aluminum Heads - H8002K
- 64cc Chamber
- 2.020" Intake Valves / 1.600" Exhaust Valves
CAM SPECS:
- Cam Type: Hydraulic Roller
- .544 Intake / .555 Exhaust Lift
- 230 Intake / 236 Exhaust Duration
- @ .050-110 Degree Lobe Separation
IGNITION TIMING:
- Initial Timing-Computer Controlled by BluePrint ECU
ALSO INCLUDES:
- Polished Chrome BluePrint Air Cleaner
- BluePrint Multi-Port Fuel Injection and Self-Learning Electronic Control Unit (ECU)
- Distributor
- Harmonic Balancer
- Single Plane Machined Aluminum Intake Manifold
- Oil Pan
- Timing Cover
- Polished Chrome Valve Covers
- Satin Aluminum Water Pump
- Spark Plugs and Wires
- Polished Front Accessory Drive with Water Pump, A/C Compressor, Alternator, and Power Steering Pump
Recommended Break in Oil: BPP710 (Click Here)
Recommended Service Oil: BPP10W30 (Click Here)
Recommended Oil Filter: BPP51061 (Click Here)
Notes:
- This engine features a true 4-inch bore, which mathematically yields 377 CID with a 3.75-inch stroke.
- Front Accessory Drive does not fit all Corvette.
- The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment. Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles.