Chevrolet Performance engineers have developed the LS364/450 6.0L as a
value-driven foundation for builders and enthusiasts looking to give their earlier
LS-powered vehicles a high-performance shot in the arm.


Starting with a strong, economical iron cylinder block and durable rotating
assembly, it features the high-lift LS6 camshaft and deep-breathing LS3
aluminum cylinder heads.
It’s a strong combination that provides exceptional
horsepower and a broad torque band. It is also fuel inection-capable, using
production-based components offered in this catalog.
Additionally, the LS364/450 is designed with the early-style 24X crankshaft and 1X camshaft
sensors, enabling easy retro-fit installation in early LS-powered vehicles.

We offer the LS364/450 exclusively as a long-block assembly, without the induction
system, ignition system or front-end accessory drive system, allowing builders to
transfer components from their early LS-powered vehicle or complete a custom
build with the components of their choice. An intake manifold that matches the
LS3/L92-style rectangular intake ports is required.

INSTALLATION NOTES
• Assembly does not include any electronics
• Engine is compatible with a vehicle's existing Gen III controller, but tuning is required
• Includes LQ9 oil pan
• Requires intake manifold matched to LS3- or L92-style rectangular intake ports
• LS3 or L96 production intake manifolds can be used, but require an aftermarket
   adapter plate for use with early LS three-bolt throttle bodies
• Not intended for marine applications
UPC 195491960848

TECH SPECS
Part Number: 19432690
Engine Type: Performance LQ9 long block
Displacement (cu in): 364 cu in (6.0L)
Bore x Stroke (in): 4.000 x 3.622 in (101.6 x 92 mm)
Block: Cast iron with 6-bolt block,
cross-bolted main caps
Crankshaft: Nodular iron
Connecting Rods: Powdered metal
Pistons: Hypereutectic aluminum
Camshaft Type (P/N 12565308): LS6 hydraulic roller
Valve Lift (in): 0.550 intake / 0.550 exhaust
Camshaft Duration (@.050 in): 204º intake / 218º exhaust
Cylinder Heads: LS3 rectangular port; aluminum, as-cast with 68cc
chambers
Valve Size (in): 2.165 intake (hollow stem)
1.590 exhaust (solid stem)
Compression Ratio: 10.3:1 (nominal)
Rocker Arms: Investment-cast, roller
bearing trunnion
Rocker Arm Ratio: 1.7:1
Recommended Fuel: Premium pump
Maximum Recommended rpm: 6,800
Reluctor Wheel: 24X
Balanced: Internal